inlet valve的例句大全

After working, close the gas bottle or inlet valve and adjust pressure valve to be relax.

工作结束后, 应关闭气瓶或管路进气阀门,逆时针旋转调节把手,使之旋到松弛状态.

When the bulb is compressed, an air inlet valve prevents blow back from the nozzle.

带有、无压缩的切换功能.带防止从吹出口吸入灰尘(逆流)功能.

Finished work every day, we must close the tank inlet valve.

每天工作完毕, 必须把水箱进水管阀门关闭.

The large holes on the left and right represent the inlet and exhausting valve ports respectively.

左右两侧的两个大孔,分别表示进气阀孔和排气阀孔.

Globe valves are usually installed with the inlet below the valve seat.

安装截止阀时,通常把进口安装在阀座下方.

Close the inlet block valve on the hottest stream.

关闭温度较高的产品流上的入口隔断阀.

The longitudinal fracture arosed in connecting nut for inlet flushing valve.

冲洗阀出现进水端连接螺母纵向断裂.

The old universal hydraulic testing machine of our company is running by the method of manual adjusting inlet and outlet oil valve and it has many defects such as testing method behindhand, intensity labour and imprecision results.

而我公司旧液压万能试验机以手动调整进、回油阀的方式运行，有试验手段落后，劳动量大和测试结果不准确等多项缺点。

Some carburetors have an auxliary fuel valve and inlet.

有些化油器具有备用的燃油阀和入口.

The test cock is on the inlet side of the shutoff valve.

测试旋塞位于关闭阀的进口一侧上.

The shutoff valve with cock is to be mounted on inlet side of the backflow preventer.

咨询州和当地规程,确保防回流阀的安装符合有关要求,如地面上适当的高度.

Verify inlet and outlet valve to 100 EX 153 are open.

确认进口阀和出口阀打开,连接到100EX153.

Close the cold water inlet valve and open a nearby hot water faucet.

关闭冷水进水阀,打开附近的热水水龙头.

Remove the relief valve hose from fitting below inlet ball valve.

从进口球阀下面连接件拆卸安全阀软管.

The valve features a transitional flow contour that increases in flow area from inlet to outlet.

该阀采用了过渡流轮廓,增加了从入口到出口的流动面积.

Close the inlet block valve on the coolest product stream.

关闭温度较低的产品流上的入口隔断阀.

Slowly open vent needle valve just as air inlet opens. Record differential pressure.

当空气进口开启时,慢慢开启排气针形阀. 记录压差.

The utility model is composed of a handle, a pull rod, a barrel body, a piston, a bottom plate, an oil inlet valve, an oil outlet valve, etc.

本实用新型由手柄、拉杆、筒体、活塞、底板、进油阀、出油阀、等部件所构成。

Firstly, MATLAB software is used to do a function resolution on flow area of the anomalous orifice spool valve, and numerical simulation on velocity and pressure distribution in the valve cartridge under different inlet flows and opening are done and the results are analyzed.

首先，对异形阀口滑阀的过流面积进行MATLAB数值解析，对不同流量、阀口开度下阀内的速度场和压力分布等做了数值模拟，并对数值计算或仿真结果做了分析。

A high capacity valve with same inlet feature as standard valve, with thread on the outlet.

这种高性能阀门具有标准阀门相同的进口特性, 在出口端为外螺纹.